Showing posts with label Painting. Show all posts
Showing posts with label Painting. Show all posts

Tuesday, March 12, 2019

Brigade Vikings III: Metal, Wood, & Flesh

My preferred method of painting is to work from the innermost levels of the figure outward: thus, In paint flesh and hair and then work out through the various layers of clothing and equipment.

Except...

I always paint the metal armor of chain and plate first. It's a messy process of drybrushing that has a tendency to got little bits of metal around. Naturally, this includes the various sword, spear and other weapons. Here are a series of pictures showing chainmail and some helmets in progress.
Shade Coat

Mid-Level

Wash
Highlight


Following the armor, I paint the wood of any spears, axes or other hand weapons.

Then, it's time to do the flesh, hair, clothes, and lastly equipment. Here are the results before Clear coat and basing:

Brigade Games Vikings: Shields

First in the process is to prime with Black and then damp brush white. I neglected to photograph those stages; but here is a shot of the shields after I applied the metal shade to the bosses:

Next was to paint and stain the wood emphasizing the wood grain. Then, I painted the leather handles and the steel rim...which should be leather, but the commission dictates.

Finally, shield patterns were accessed from various fan sites for the show Viking. Here are the results:


Brigade Games Vikings II: Mould line correction

Sometimes after cleaning and priming one discovers mould lines...it's frustrating but definitely worth the time it takes to correct them. Take a deep breath and look before you start the scrape and file...



I found six figures that needed remediation.  Three had very faint lines which required another scrape with a knife. The fourth was a mystery how I had missed the lines. The fifth actually required some careful filing as the line ran from hair to forehead to neck. The sixth was an accident...it seems the Vikings had trousers with a seam down the side and I scraped the primer but not the seam before I realized my mistake.

Here's the process I followed: clean the figure up. Next brush paint on some black primer. Let the primer thoroughly dry.  Repairing the prime levels is a slow process as you need each level to fully dry. I tend to leave them perhaps an hour unless I use an oven.  When the primer is ready, dry brush on skeleton bone and let thoroughly dry. Finally, dry brush white on the figure and dry.


Tuesday, March 5, 2019

Brigade Games Vikings Painted awaiting basing...

Recently, I was commissioned by Brigade Games to paint some of their Viking figures. A total of seventeen figures were sent. Packs 12-19. I started them some time ago; but haven't posted until now.

These are the figures after I spray primed with Games Workshop Black, zenithal spray primed with Skeleton Bone by Army Painter; and damp brushed with Vallejo White. I neglected to take pictures at each stage...but here is a photograph of them after I glued on a mixed sand.

Looking over the photograph posted on Instagram, I did notice a mould line or two that escaped the preparation the first time.

The next step is to correct the mould lines and apply base coats. 

Friday, January 23, 2015

Squad Painter's BLOG

Squad Painter's BLOG is one of the many BLOGs I follow. Today, he posted some beautiful shots of the Perry 28mm French Napoleonic Infantry. This is a box (actually several) that I have been wrestling with...not literally. As I get closer to completion of my current paint table project, the Perry French have weighed heavily on my mind as to the best way to paint.


Squad Painter recently posted a basing tutorial. Then he posted his work using the Army Painter System. Take a look at the results. He used the standard Block Paint, Quickshade and highlight with the base color. I've been using this method with my son's Mars Attacks figures. I think I'm going to try it with the La Haye Sainte project...check out the Squad Painter's photos:

And, follow Squad Painter's BLOG.

Thursday, January 15, 2015

Flames of War Paint Sale

I posted yesterday about paints...this morning, I received an email about the Flames of War paint sale. I hope you don't mind the advertising. I'm not getting compensated--I wish I was. If you use these sets the prices are lower than usual....



To order, go Here.

Wednesday, January 14, 2015

Replacing Paints

Years ago, I painted with Humbrol paints. When I discovered Armory Paints, I switched. I still have some of the Armory colors in usable shape many, many years on. as time went on, I added the Citadel paints since they became the only ones I could purchase locally. Some of these old Citadel paints, inks and glazes are still in my paint box as they never dry up if you close them; but they are getting low and all the backups are opened except one...I think I have a glaze in yellow or purple in my basement.

Over the years, I stuck with Citadel since there was a store around the corner that always had every color. The successive changes in lids over the years have gone from bad to worse to worst. The old snap top was great. As I mentioned, I have some of those paints, inks and glazes that have to be around twenty years old; I just retired an armor wash and a red ink because the lids physically wore through.

GW changed to a screw tops that stunk but they kept a seal. I have some of those. The second to last iteration of flip tops was OK but required a period check on the paint if you weren't using it to keep from drying out. I just gave away a ton of those to a starting painter because I knew the backups would be dead when I needed them and taking care of them was becoming a drain on limited hobby time.. paint a figure or check the paints and add water

Then came the latest flip top! It "felt like it was a return to yore. I was surprised as it didn't fit with the GW step away from the consumer; but I reconciled it with a change in the paint names and color matching. the seal on the bottle is an illusion; I have suffered more dryouts in the last year than in all my years of painting. And it's not just me as my friend Evil Bob posted on Facebook resulting in his rebottling all the GW paints due to dryout. I recently had a bottle dry out after using it once--note, I don't paint from an open bottle and I am careful to close my tops.

As the paint lids and color names have changed, local stores have added other paint lines. As a result, I have added a variety of paint systems. I now have Army Painter, Reaper, Vallejo, Liquitex, Foundry, GW, Armory and some others.

I do like the dropper bottle that many of them utilize. Thankfully, all of the local hobby shops and gaming stores are carrying these different lines. unfortunately as the retailer tries to become everyhting to everyone, there are too many lines for them to carry them all or in sufficient quantities not to have gaps. Having a back up (expensive and prone to mishap for some lines) is necessary unless you are good at color matching.

Dakka Dakka forum  has a great color match chart. Check it out. It's great. I also increasingly use the Army Painter color primers when I discovered they have a bottle that is a 100% match. And they now have Soft Tone, Strong Tone and Dark Tone Wash bottles of their Quick Shade system that allows you to do the paint on dip in small doses when you have les than 100 figures to dip.